Rolling machine series --- Inverted tube rolling machine -------------------------------------------------- Applicable to metal tubes (rods)

Product Name: FR - 20 Fully Automatic Beveling Machine 

Product application: This equipment is suitable for the drawing and stretching processes of metal round tubes (rods) and can be used as a supporting device for these processes. 

Mechanical layout: Horizontal type with 12 rollers (6+6 sets), made in Taiwan, brand name unknown. 

Processing range: Round rods (HeXRods) with diameters from 8mm to 18mm, hexagonal (HeX) with diameters from 10mm to 16mm. 

Processing length: 2 - 4 meters 

Motor power: 15KW 

Maximum speed: 18 - 25 pieces per minute 

Overall dimensions: 3250 × 1450 × 1250

一、 Overview of the inverted pipe coiling machine product:

The inverted pipe drawing machine produced by our company is a device developed for drawing medium and low carbon steel wires, stainless steel wires, special-shaped steel wires, and coarse and medium-diameter metals of various metals, in a non-sliding manner. It is suitable for the standard parts industry, supermarket shelf manufacturing industry, and steel wire processing enterprises. If used in the brass wire industry, it can strip and stretch the non-oxidized brass rods, and the drawing machine is equipped with two sets of stripping and stretching mold boxes. Machine features: The transmission system adopts a combination of a first-level strong narrow V-belt and a hard tooth surface reducer or a swing ring reducer, which is safe and reliable; the take-up reel is heavy; the reel is forced air-cooled; pneumatic pressure wheels; the take-off reel has independent power and the diameter of the taken-off coil can be adjusted; the AC variable frequency speed regulation is adopted, which makes the machine operation convenient and saves more than 30% energy.

二、Working principle of the inverted pipe coiling machine:

          The motor is driven by the pulley and three-stage gears, which in turn rotates the drum placed on the output shaft of the reducer to pull the wire. The wire after being pulled is guided by the lead roller and introduced into the wire-down frame. The wire-down frame rotates synchronously with the drum.

三、  Structural features of the inverted pipe coiling machine:

         This equipment is a vertical pipe drawing machine. The drum is placed upside down at the lower part of the reducer, and the drawn wire can be directly collected into the wire receiving frame, thus achieving large-scale wire collection.

四、The equipment composition of the inverted pipe coiling machine:

      This equipment is mainly composed of the frame, reducer, drum, wire dropping frame, trolley, pneumatic system, AC variable frequency speed control electrical control system and motor.