Product Name

Specification

Unit Price (Yuan)

Latte maker

FR-25 Model

一、Equipment Overview

A. Applicable

This equipment is suitable for the processing of metal tubes (rods) through stretching (pulling, cold drawing, polishing, and embossing) operations... Purchase of a single-row chain-type drawing machine

Ｂ．Mechanical structure

Single-strand drawing machine - Taiwan brand drawing machine technology　

二、Work method

At one end of the material, after being reduced in size by the shrinkage head (pressing head), it is held by hand and inserted into the center frame mold of the drawing machine. After being pneumatically clamped, the chain hook engages with the chain for drawing. During the drawing process, it is required that the machine body vibration be small, the drawing speed be uniform and stable, and the best precision of the finished product after stretching be achieved. The finished product should have a uniform surface, be smooth and have a good quality. Usually, the above requirements are met after the stretching process.

三、Equipment Capacity

Ａ．Stretching form

1. Linear stretching

Ｂ．Tensile force

10KN

Ｃ．Stretching speed

0-22m/min　　Can be manufactured as per requirements

Ｄ．Stretch length

3m

E．Outer diameter of the pipe

The greatest Ф28

F．Center height

730mm

4．Machine construction

Ａ．Motor and operation panel

（1）Varieties

Excitation speed control motor 7.5KW, 1 unit; reducer ZQ400, 1:31.5, 1 unit; trolley speed control motor 1HP, 10:1, 1 unit.

（2）Effort

47.7Ｎ.Ｍ

（3）Speed

1250-125r/min

（4）Power supply voltage

380Ｖ　50ＨＺ

五、Drive section

Spindle

（1）Rack

C250C100 channel steel welded track, 25*25 square steel main frame: Above is C250*4300 machine foot, C100 extrusion frame: None

（2）Chain

Ｐ＝2" Chain

（3）Chain wheel shaft

Ф50

六、Supporting structure construction

（1）Base plate

Spherical template ф125mm

（2）Mold installation frame

Steel plate welding structure (cylinder push-in rod internal mold)

（3）Pulling cart

Pneumatic clamping device, clamp-type arm, pneumatic chain hook, return chain drive with belt reduction

（4）Automatic cutting of materials

No

（5）Pulling oil injection method

Generally

七、Installation and commissioning

The above-mentioned requirements regarding design and manufacturing will be handled by the supplier after the equipment arrives. The supplier will be responsible for installation, commissioning and operation of the equipment. Additionally, they will also be responsible for guiding the use, maintenance and repair of the equipment.

八、Guarantee provisions

If any problems or defects occur within one year of the equipment's use due to design, manufacturing or materials, the supplier shall be responsible for repairing and replacing the relevant parts. However, this does not include problems caused by improper use or natural disasters. The mold components are not covered by the warranty.

九、Others

Both parties agree to provide the installation diagrams of the equipment after signing the contract. The client is required to provide the power supply, gas supply configuration, chain lubricant, reduction oil, and tensioning oil.

9．Transaction conditions

（1）With tax included

Including 17% value-added tax, excluding tax amount reduced by 10%

（2）Freight cost

Excluding shipping cost

（3）Packaging

Without packaging

（）4）Payment terms: Deposit

Pay a 30% deposit for the goods. The remaining balance must be paid before shipment.

（5）Mold

The original molds do not require any additional configuration.

（6）Acceptance method

Supplier factory inspection

（7）Stock available now

Yes / No  -  In Stock